The Maxxus MX-K206-01-ZF is a 2-person FAR infrared sauna in Canadian Hemlock. It carries the lowest electromagnetic field rating in the Golden Designs range — near zero EMF, under 2 milligauss measured 2–3 inches from the heating panels — while remaining a plug-and-play 120V unit suitable for indoor installation.
Near Zero EMF Rating
The cabin uses six PureTech™ near zero EMF FAR infrared carbon heating panels: two on the rear wall, one on each side wall, one under the bench, and one in the floor board. For comparison, standard low EMF panels measure 6–10 milligauss and ultra low EMF panels measure under 3 (both at 6–8 inches), while the near zero rating is under 2 milligauss measured at a closer 2–3 inches. This is the lowest EMF rating among the infrared saunas we carry.
Cabin and Construction
Exterior dimensions are 50″ × 42″ × 75″ (add 5.9″ for the roof overhang); interior is 45″ × 37″ × 68″, with full two-person bench capacity. At 275 lbs assembled and shipping in two boxes, it is among the lighter cabins to move into a basement or upstairs room. Construction is natural reforested Canadian Hemlock in its natural color, with a bronze-tinted tempered glass door and side windows. It can be installed on carpet or any indoor floor.
Electrical and Included Features
Electrical service is a standard 120V/15A outlet — no electrician required. The MX-K206-01-ZF includes an FM radio with Bluetooth and MP3 auxiliary connection through built-in speakers, interior chromotherapy color lighting with a red light feature, exterior accent lighting, and interior and exterior LED control panels. The operating range is 118–132°F, with a maximum of 140°F.
Comparison With Related Models
- Maxxus MX-K206-01-ZF — near zero EMF (under 2mg), FM radio, natural hemlock finish.
- Dynamic Venice Elite — ultra low EMF (under 3mg), honey-stained cabin, exterior accent lighting.
- Maxxus S-Line Yoga — full spectrum heat and three-person capacity in Pacific Cedar.
Maxxus 2-Person — Frequently Asked Questions
How does near zero EMF compare with ultra low EMF?
Near zero is under 2 milligauss measured at 2–3 inches; ultra low is under 3 milligauss measured at 6–8 inches. Both are low ratings; near zero is measured closer to the panel and reads lower.
What are the electrical requirements?
A standard 120V/15A household outlet, ideally dedicated. Plug and play.
How difficult is assembly?
Two people, clamp-together panels, about an afternoon. At 275 lbs total in two boxes, it is straightforward to move.
Is the warranty included?
Yes. The full manufacturer warranty applies through Norse Steam, an authorized Golden Designs/Maxxus dealer.
Contact us for measured EMF ratings across models, including the distance each is measured from, for a direct comparison.
Golden Designs creates a luxurious and comfortable sauna experience, combining craftsmanship and quality.
Since 2008, they’ve grown to be North America’s largest supplier of infrared saunas and a top manufacturer of high-quality, full-spectrum models.
Each sauna is crafted from premium materials like Western Canadian Red Cedar, Pacific Premium Cedar, and Natural Canadian Hemlock. To enhance the experience, their saunas come equipped with thoughtful features such as Bluetooth stereo systems, chromotherapy lighting, and Himalayan salt bars, making every session both therapeutic and enjoyable.
Low EMF Infrared Saunas: Deep Detoxification and Safe Heating
Far-infrared (FIR) is the longest infrared wavelength on the light spectrum, with a range of 3000 nm to 0.1 mm. This wavelength penetrates deeply beneath the skin, warming the body from the inside out. As a powerful detoxifying agent, FIR encourages fat-based sweating, where many toxins are stored, making it especially effective for cleansing at a cellular level.
Optimal Temperature Range
These saunas are designed to operate within an ideal temperature range of 118°F to 132°F, with the capability to reach up to 140°F for users seeking higher heat.
Low EMF Standards
Our Low EMF Infrared Saunas maintain EMF levels between 6-10 milligauss (MG), measured 6 to 8 inches from the heating panels, offering a safe environment for regular infrared therapy sessions.
Full Spectrum Infrared Saunas: Comprehensive Health Benefits
Full Spectrum Infrared Saunas combine NEAR, MID, and FAR infrared wavelengths to target multiple health benefits.
- FAR Infrared: Deeply penetrates fat tissue, activating sweat glands to release toxins.
- MID Infrared: Reaches muscles and joints, boosting circulation and reducing pain.
- NEAR Infrared: Targets the skin’s surface, promoting cell health, skin renewal, and reducing inflammation.
Near Zero EMF Infrared Saunas: Safe and Effective Heating
Golden Designs’ Near Zero EMF Saunas offer a natural, low-EMF thermal experience using PureTech Near Zero EMF Heating Technology. These saunas deliver FAR infrared heat with EMF levels kept under 2 milligauss (MG) at a close range of 2 to 3 inches from the heating panels.
- Temperature Range: Ideal between 118°F and 132°F, with a max of 140°F.
- Safety: Maintains near-zero EMF exposure, prioritizing a safe environment.
Ultra Low EMF Infrared Saunas: Safe, Deep Heating
Dynamic Ultra Low EMF Saunas deliver a natural thermal experience with minimal EMF exposure, using PureTech Ultra Low EMF Heating Technology and FAR infrared wavelengths.
- Temperature Range: Operates ideally between 118°F and 132°F, with a maximum of 140°F.
- EMF Safety: EMF levels kept under 3 milligauss (MG), measured 6 to 8 inches from heating panels.
These saunas provide effective, deep-reaching heat therapy in an ultra-low EMF environment, offering a safe option for consistent infrared use.
































































































































































